Nice ROBUS400-KIT 400 BD 24Vdc kit for a sliding gate up to 400Kg
For sliding gates weighing up to 400kg.
Nice BiDirectional products indicate the status of the automations and confirm correct reception of the command.
The Kit Contains:
- 1 x RB400 1 Irreversible electromechanical gearmotor, with built-in control unit and OXIBD bidirectional radio receiver with connector for connection via Nice
- 1 x EPMB Pair of external photocells designed for connection by Nice BlueBUS.
- 1 x EKS Key switch
- 1 x ELD
- 2 x MYGO4 4 channels transmitters.
- User-friendly: thanks to the BlueBUS system, the control unit can be connected to up to seven pairs of photocells and control, security, and signalling devices with just two wires.
- Practical: The control unit and PS124 buffer battery (optional) can be connected using a simple connector and housed directly inside Robus.
- Advanced: The RB400 is equipped with a temperature sensor, which adapts the motor power to the climatic conditions and simultaneously cuts out heat. A master/slave selection automatically synchronises two motors. This means it is possible to automate two-leaf sliding gates set opposite each other.
- Intelligent: The RB400 is equipped with a temperature sensor, which adapts the motor power to the climatic conditions and simultaneously cuts out heat. A master/slave selection automatically synchronises two motors. This means it is possible to automate two-leaf sliding gates set opposite each other.
- Safe: Acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
- Sturdy: base and release in pressure die cast with an easy-to-open handle.
- Very quiet: gear motor on bearings.
Technical | |
Battery Backup Option | Yes |
BlueBus | Yes |
IP Rating | 44 |
Max Gate Weight | 400Kg |
Max Speed | 34cm/sec |
Motor Voltage | 24Vdc |
Solar Power Option | Yes |
Work Cycle | 35 |