Nice ROBUS400-KIT 400 BD 24Vdc kit for a sliding gate up to 400Kg

For sliding gates weighing up to 400kg. 

Nice BiDirectional products indicatethe status of the automations and confirmcorrect reception of the command.

The Kit Contains:

• 1 x RB400 1 Irreversible electromechanical gearmotor, with built-in control unit and OXIBD bidirectional radio receiver with connector for connection via Nice 
• 1 x EPMB Pair of external photocells designed for connection by Nice BlueBUS.
• 1 x EKS Key switch
• 1 x ELD
• 2 x ON3EBD 433.92 MHz, 3 channels, bi-directionals transmitters.
  

user-friendly: thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires.
Practical: control unit and PS124 buffer battery (option- al) can be connected by means of a simple connector and can be housed directly inside Robus.
Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other..
safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre..
sturdy: base and release in pressure die cast with easy to open handle.
Very quiet: gear motor on bearings.