Nice FT210B pair of BlueBus photocells

Blue-Bus connection photocells with a wireless transmitter to secure on a moveable leaf
Please note the FT210B BlueBus photocells are not compatible with MC824H or MC800 control board, they are only suitable with sliding gate automation.

Horizontally adjustable through 210° and 30° vertically, for automation according to Standards.

• The safety level of the main edge, required by the EN12453 standard, can be achieved for any “type of use” and any “type of activation” by integrating an FT210B device to an 8.2kohm TCB65 type resistive sensitive edge.

• The FT210B device, integrated with a “resistive” sensitive edge (8.2kohm), is safe against individual faults or can be used with automated systems with self-diagnosis at the start of every manoeuvre.

• Relay output with 2Ah (FTA2) and 7Ah (FTA1) battery Kit, for intensive use.

* The battery is not provided with the photocell.

• Cutting-edge technology: The anti-collision circuit avoids interference with other out-of-sink receivers. The FT210B optical devices are equipped with a special sensor capable of recognizing when the gate is motionless, which remains in a low consumption mode and activates only when the gate is in motion.

• Suitable for any architectural environment and easy to install.

• Resilient and safe: Polycarbonate casing; FA1 vandal-proof metal shell (optional); low transmitter battery indicator.
The photocell has a transmitter that runs on a battery (FTA1) so it is only necessary to run a cable to one side. This is useful if a cable is damaged, or one has not to be installed on one side of the gateway.